<?xml version="1.0" encoding="UTF-8" ?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:wikidot="http://www.wikidot.com/rss-namespace">

	<channel>
		<title>GRemote - mini host for Arduino GCode Interpreter</title>
		<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter</link>
		<description>Posts in the discussion thread &quot;GRemote - mini host for Arduino GCode Interpreter&quot;</description>
				<copyright></copyright>
		<lastBuildDate>Fri, 06 Nov 2026 19:26:19 +0000</lastBuildDate>
		
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1817040</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1817040</link>
				<description></description>
				<pubDate>Thu, 18 Jul 2013 05:19:51 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Updated the code on Github to support 2.0, luckily changes were minor. Also, binaries are now available on Github as well.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1816365</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1816365</link>
				<description></description>
				<pubDate>Wed, 17 Jul 2013 06:47:11 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi, this seems to be due to changes in Processing 2.0. I'll need to do a few modifications to the code to get it to work with 2.0.</p> <p>In the meantime, I attached GRemote-binaries.zip file to this thread; it contains the latest binaries - you should be able to run them.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1813094</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1813094</link>
				<description></description>
				<pubDate>Thu, 11 Jul 2013 15:52:11 +0000</pubDate>
				<wikidot:authorName>5erg10</wikidot:authorName>				<wikidot:authorUserId>1672464</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi!!!<br /> I am a new member, I found really helpfull information here. I was developing a mini-CNC project, especially the motion issues&#8230; I´m a little confused whit some things, specially whit the code sender, in this case GRemote. I am able to try whit another sender, GRemote fills all my needs.</p> <p>Now I had a problem when compiling GRemote on Processing, the info bar writes: &quot;<em>The method selectInput(String, String) in the type PApplet is not applicable for the arguments (String)</em>&quot;&#8230; I do not know what does it mean.</p> <p>If anyone can post some solution for me, I woud be glad. Thanks!</p> <p>Sergio.</p> <p>Note: Sorry my English, I speak Spanish.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1407338</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1407338</link>
				<description></description>
				<pubDate>Sun, 01 Apr 2012 19:42:06 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Thanks for the kind words.</p> <p>The ZERO button in the latest release only enables the zero mode - the actual zero set is done by left arrow (X), down arrow (Y), page down (Z) while in the zero mode. Currently it works on per-axis basis i.e. it's impossible to zero more than 1 axis at a time (or move to zero on more than 1 axis). I think I'll change this so that HOME button would enter zero mode, arrows and page up/dn would select desired combination, and another HOME button press would send the desired command and exit the zero mode.</p> <p>The cause for the robot moving not as specified could be in many places - firmware, gcode, robot etc. Would need to know the details what commands throw things off.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1402159</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1402159</link>
				<description></description>
				<pubDate>Mon, 26 Mar 2012 03:05:31 +0000</pubDate>
				<wikidot:authorName>cybair</wikidot:authorName>				<wikidot:authorUserId>1183846</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Big Thanks for providing us with this interface.<br /> I installed it on Windows XP and could transfer Gcode files with some success.<br /> One trick that I learned is that after uploading the contraptor firmware with Arduino, I have to reboot the computer; otherwise Gremote can't connect to the Arduino.<br /> Apart from that, the ZERO button doesn't seem to send the right gcode command. I think it should send something like this: G92 X0 Y0 Z0. That's no big deal because that command can be sent manually instead of using the ZERO button.<br /> At this point in time, I am able to send Gcode files made with Cam Bam but at some point through the file, the firmware fucks up and the spindle moves to the wrong places. I can't find anything wrong in the Gcode file or Gremote. Suggestions would be appreciated here.</p> <p>Keep up the good work</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1336930</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1336930</link>
				<description></description>
				<pubDate>Thu, 29 Dec 2011 11:12:52 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi !<br /> Great work !</p> <p>Just found this : <a href="http://www.thingiverse.com/thing:14980">http://www.thingiverse.com/thing:14980</a><br /> It's a gcode viewer, opensource, make in processing, with 3D etc &#8230;<br /> Do you think you'd have a hard time integrating this into GRemote, to get something like a &quot;preview&quot; button ?</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1335420</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1335420</link>
				<description></description>
				<pubDate>Tue, 27 Dec 2011 01:26:53 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>A new version of GRemote is released. Source and binaries for Win, Linux, Mac are now available here: <a href="https://github.com/AlbanetcSr/GRemote">https://github.com/AlbanetcSr/GRemote</a></p> <p>The new features include:</p> <ul> <li>jogging in both absolute and relative mode (using gcode parser and position tracking)</li> <li>jog settings with jog size (decimal + fractional) and feed rate (incl. seek/rapid option)</li> <li>multi-axis/multi-size jogs using &quot;accumulate&quot; button (XYZ/DEL)</li> <li>arc movements given direction, radius, start &amp; end angle (ARCS/INS)</li> <li>homing to preset limits, separate for XY and Z</li> <li>zero and memory set/goto per each axis (HOME,END)</li> <li>baud rate selector</li> <li>keyboard shortcuts: try j, h, a, +, -, X/x, Y/y, Z/z</li> <li>scaling feed rates with inch/mm switch</li> <li>modifications to support Grbl (though it /support/ is far from perfect)</li> <li>console for Windows (must run GRemote.bat instead of .exe)</li> <li>many modifications/improvements under the hood, including <ul> <li>waiting-for-response state support</li> <li>code cleanup/rearrangement though there's still a lot of work on this</li> </ul> </li> </ul> <p>Screenshot:</p> <img src="http://farm8.staticflickr.com/7027/6573358689_968f750e6d_o_d.png" alt="6573358689_968f750e6d_o_d.png" class="image" />
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1279672</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1279672</link>
				<description></description>
				<pubDate>Wed, 12 Oct 2011 14:49:18 +0000</pubDate>
				<wikidot:authorName>cybair</wikidot:authorName>				<wikidot:authorUserId>1183846</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Albanetc,</p> <p>Thank you for developing Gremote. That's exactly the kind of software necessary for Contraptor success.<br /> I installed it on Win XP and got the same results as Anydany: The interface shows only the com port dropdown and the Gcode entry line. However, I was able to set the proper com port and and I could send Gcode sucessfully through the entry line. The Gcode was executed and returned an &quot;ok&quot;.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1262599</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1262599</link>
				<description></description>
				<pubDate>Tue, 20 Sep 2011 04:56:52 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Thanks! The controls should appear once the remote received the word &quot;start&quot; from the firmware. You would see that in the mini-console. If nothing is received, there may be nothing plugged to that serial port, or the firmware may be set to use different baud rate. The remote talks to the board at 38400 (note to self - make baudrate selectable via dropdown). That said, I haven't tried it on Mac.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1262027</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1262027</link>
				<description></description>
				<pubDate>Mon, 19 Sep 2011 16:43:00 +0000</pubDate>
				<wikidot:authorName>anydany</wikidot:authorName>				<wikidot:authorUserId>1201310</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>nice, exactly what I'm looking for!</p> <p>hope you can help to get it running&#8230; I have started your app under os x (old ppc) and I can only see the serial port dropdown, and the gcode entry line. all the other buttons are nonexistant in my UI. any idea? I haven't played around alot, just asking if you have a quick answer to that.</p> <p>also when rebuilding the app from processing, I get no warnings. anyway, I am totaly newbie to processing&#8230; glad if you have an idea, thanks.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1251573</guid>
				<title>Re: GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1251573</link>
				<description></description>
				<pubDate>Tue, 06 Sep 2011 07:33:32 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Great, can't wait to try this out !</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-388209#post-1251397</guid>
				<title>GRemote - mini host for Arduino GCode Interpreter</title>
				<link>https://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter#post-1251397</link>
				<description></description>
				<pubDate>Tue, 06 Sep 2011 03:13:52 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <div class="image-container floatleft"><a href="https://www.flickr.com/photos/40642599@N07/6117941587/"><img src="https://farm7.static.flickr.com/6200/6117941587_00a8b3daa3_z.jpg" alt="flickr:6117941587" class="image" /></a></div> <p>I've been using a hacked together Python script for communication with Arduino GCode Interpreter, including sending gcode files. This has generally worked well, but it's not very convenient to jog a robot from command line. I also thought it would be great to have a simple and intuitive UI with these basic functions, and use keyboard for jogging.</p> <p>There seems to be plenty of host sotfware out there, including things specifically written for *duino based GCode interpreters, like <a href="https://github.com/damellis/gctrl" target="_blank">gctrl</a> , as well as 3D-printing oriented hosts like Reprap Host and ReplicatorG. There are also numerous scripts in Python and other languages. They all probably work well, but I wanted a UI and a bit more functionality usually found in command line hosts; on the other hand, a lot of functionality and controls in 3D-printing hosts would probably be an overkill for someone who just wants the basics.</p> <p>After spending several evenings dabbling in <a href="http://processing.org/">Processing</a> and <a href="http://www.sojamo.de/libraries/controlP5/">controlP5</a> (a great UI library for Processing) here is something with a working name of GRemote. It can do three things - issue GCode commands from text input, move the robot with jog buttons and send GCode files. It's intended to work with Arduino Gcode Interpreter, but it should also work with any firmware which understands ASCII GCode and whose responses are &quot;start&quot; for the initialization, and &quot;ok&quot; is the last response for every command sent. The baud rate is fixed at 38400 though that should probably be exposed in the UI via another dropdown (next to the serial port).</p> <p>Hopefully the following is self evident from the UI and common sense:</p> <p>Jogging only works in Relative mode and 1 jog distance is 1 unit - mm or inch, depending on the mode. Only X,Y,Z jog buttons work at the moment as I'm not yet clear what to assign to INS, DEL, END (more axes?) and to a lesser degree, HOME.</p> <p>The Absolute and Inch modes are toggles - unless remote is sending a file, these can be clicked and remote will issue appropriate command to the firmware. The commands being sent to firmware (when sending a file or from text input) are also inspected and in some cases (like the Absolute/Inch mode change) acted upon.</p> <p>The &quot;console&quot; display shows last 10 lines of what's going on, and on Linux, these are also written out to terminal from which GRemote is launched. On Windows, I'm not sure how to bring up a separate console, other than running source in Processing PDE. I'm guessing it's simple and should be easy to do with some research - if not, logging to file can be added.</p> <p>File send can be paused (making jog and mode controls available), resumed and cancelled. Few words about pausing:</p> <p>Jogging has to be done either with limit switches operational, or without hitting physical constraints of the axis. Hitting the physical axis constraints make steppers skip steps which moves coordinate system origin. Not a big deal if you're just jogging, but if you've paused a file and intend to resume it, it's a problem.</p> <p>Upon resuming the file, the Absolute and Inch mode settings should be the same as before pausing - otherwise things will go wrong. Maybe remote should remember the mode state before pausing and force-restore it upon resuming.</p> <p>If the file being sent uses Absolute mode, after pausing and resuming the file, the very next command should go to the right position even if robot was jogged elsewhere. If the file being sent uses Relative mode, the robot should be manually returned to pre-pause position before resuming.</p> <p>The zip file with Windows, Mac, Linux versions and the source is attached to this thread: <a href="http://www.contraptor.org/local--files/forum:thread/GRemote.zip">http://www.contraptor.org/local--files/forum:thread/GRemote.zip</a><br /> Unzip the appropriate application.* folder to your local machine and run GRemote.exe or GRemote bash script.</p> 
				 	]]>
				</content:encoded>							</item>
				</channel>
</rss>