<?xml version="1.0" encoding="UTF-8" ?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:wikidot="http://www.wikidot.com/rss-namespace">

	<channel>
		<title>Gcode Sender Program</title>
		<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program</link>
		<description>Posts in the discussion thread &quot;Gcode Sender Program&quot; - I made a GUI for sending gcode to arduino based CNC machines.</description>
				<copyright></copyright>
		<lastBuildDate>Fri, 06 Nov 2026 18:49:52 +0000</lastBuildDate>
		
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-2033076</guid>
				<title>Problem with Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-2033076</link>
				<description></description>
				<pubDate>Fri, 16 May 2014 14:29:13 +0000</pubDate>
				<wikidot:authorName>Musicthera</wikidot:authorName>				<wikidot:authorUserId>1890934</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi. I have a problem with the comunication between my arduino uno and gcodesender program.</p> <p>After I have used Xloader in a satisfactory way, I just load Gcodesender and when I click on the open icon, this appears on the Console screen and this lines are shown indefinitely:</p> <p>The black squares are white; I didn´t know how to write them.</p> <p>Connected to COM• @ 9600 baud</p> <p>Grbl 0.8c [$´ for help]<br /> [´$H´|´$X´ to unlock]<br /> &lt;A´k■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■<br /> Grbl 0.8c [$´ for help]<br /> [´$H´|´$X´ to unlock]<br /> &lt;A´k■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■<br /> Grbl 0.8c [$´ for help]<br /> [´$H´|´$X´kk■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■<br /> Grbl 0.8c [$´ for help]</p> <p>(And so on&#8230;)</p> <p>I can´t send anything through the command window.</p> <p>¿Could anyone explain me what is going wrong?</p> <p>I´d prefer that your answers will be in spanish, but if not, it doesn´t matter.</p> <p>Thanks.</p> <p>Roberto.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1899144</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1899144</link>
				<description></description>
				<pubDate>Fri, 22 Nov 2013 16:03:15 +0000</pubDate>
				<wikidot:authorName>paranguiz</wikidot:authorName>				<wikidot:authorUserId>1776934</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Acabo de postear algo que te puede ayudar, busca la respuesta en ControlWindows en este mismo foro, a solo un post de aquí.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1899142</guid>
				<title>Re: ControlWindow</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1899142</link>
				<description></description>
				<pubDate>Fri, 22 Nov 2013 16:00:53 +0000</pubDate>
				<wikidot:authorName>paranguiz</wikidot:authorName>				<wikidot:authorUserId>1776934</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hola<br /> Antes que nada espero que sirva esta informacion, me he unido recien a este tema.<br /> El error que mencionas (Can not find anything named: ControlWindow.NORMAL) se debe a la version de la libreria, debes usar una version anterior, la que sirve es la &quot;controlP5_0.5.4&quot;<br /> Debes descomprimir esta libreria dentro de la carpeta libraries que se ubica dentro de tu carpeta &quot;sketchbook&quot;<br /> Esta libreria en cuestion solo funciona con el procesing 1.5, asi es que si bajaste la version, 2.0 me temo que no te servirá.</p> <p>Espero no sea demasiado tarde para la respuesta.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1813113</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1813113</link>
				<description></description>
				<pubDate>Thu, 11 Jul 2013 16:20:46 +0000</pubDate>
				<wikidot:authorName>5erg10</wikidot:authorName>				<wikidot:authorUserId>1672464</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi guys!!!<br /> I am a new user&#8230; Thanks for all the info developed here!!! Really helpful!!!</p> <p>MMarz, thanks for your Gcode Sender Program&#8230; but, I can not run the program!<br /> I am dont know any thing about code, libraries, software, and related issues&#8230; but I need some kind of tool for sending Gcode to an arduino, and your program looks like my solution; when Processing compiles the sketch appears this problem: &quot;Can not find anything named: ControlWindow.NORMAL&quot;&#8230; I found that &lt;ControlWindow&gt; is a file into ControlP5 library.</p> <p>If anybody can help me, I would be glad!!!</p> <p>Sergio.</p> <p>NOTE: Sorry my English, I speak Spanish.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1807228</guid>
				<title>ControlWindow</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1807228</link>
				<description></description>
				<pubDate>Mon, 01 Jul 2013 14:52:07 +0000</pubDate>
				<wikidot:authorName>osmaru</wikidot:authorName>				<wikidot:authorUserId>1664764</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Buenos dias, he instalado el GcodeFeeder, tambien he instalado el ControlP5, al iniciar el programa, me da el siguiente error:<br /> Cannot find anything named&quot;ControlWindow.NORMAL&quot;</p> <p>¿Como puedo solucionar el problema?</p> <p>Gracias<br /> Saludos</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1294377</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1294377</link>
				<description></description>
				<pubDate>Mon, 31 Oct 2011 03:05:13 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I've been creating a number of 2D shapes where I need to increase the depth of cut between passes. I modified my code to handle this for me. So at the top of the file I've added a starting height and a maximum depth. The program also turns the spindle on and off. The G code file then other than the first line the file consists of only the X and Y points. Again the code is at the site shown on the October 13th entry.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1291534</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1291534</link>
				<description></description>
				<pubDate>Thu, 27 Oct 2011 03:44:28 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>All, I added a Darlington transistor to activate a relay to turn the router on and off with the Arduino. It worked for awhile but then quit. After much trouble shooting I finally found that I needed to add pinMode(MOTOR_ON_PIN, OUTPUT) in the spindle_control.pde program. I have no clue why it should have ever worked without this line. I'll warn you I have not done anything more than make sure the router turns on. I've uploaded the updated modified Gcode interpreter to my website. The link is shown in my post on October 13th.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1288726</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1288726</link>
				<description></description>
				<pubDate>Mon, 24 Oct 2011 02:11:17 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Thank you for the nice comment. I've created a second version of the program to run a G code file from the command line. It is at the same link as I posted above.</p> <p>Thanks for the tip I'll go stare at the firmware code some more as none of the other things I've tried have worked.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1280920</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1280920</link>
				<description></description>
				<pubDate>Fri, 14 Oct 2011 05:02:11 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Nice work, regarding the jog button behavior - since there is lookahead feature in the firmware, it's possible for the firmware to interpret two sequential +1s as +2. Not sure if this is what you're observing though but I thought I'd mention it.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1280429</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1280429</link>
				<description></description>
				<pubDate>Thu, 13 Oct 2011 15:38:46 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>It would seem I can post now. Below is a link to a web site I created where you can get a Python script to send G code to the Arduino. Having played with it for a while now I'm finding more things that need to be fixed that are annoying, but at least I can send files.</p> <p><a href="https://sites.google.com/site/chuckscncarduino/">https://sites.google.com/site/chuckscncarduino/</a></p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1259810</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1259810</link>
				<description></description>
				<pubDate>Fri, 16 Sep 2011 04:55:42 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Here is the error I receive. I'm don't think I'm a guest so I'll have to assume that I've no karma.</p> <p>The data you have submitted contains following errors:</p> <p>Guests and low-karma users are not allowed to publish links on this site.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1259785</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1259785</link>
				<description></description>
				<pubDate>Fri, 16 Sep 2011 03:37:29 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Links should work, there are no restrictions as far as I know</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1259755</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1259755</link>
				<description></description>
				<pubDate>Fri, 16 Sep 2011 02:25:42 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Below is a link to a web site I created to distribute my Python script to send G code to the Arduino running the G Code Interpreter. You'll need my modified G Code Interpreter as explained on the web site.</p> <p>Sorry, I guess I'm not allowed to put a link in.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1258191</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1258191</link>
				<description></description>
				<pubDate>Wed, 14 Sep 2011 06:01:47 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Same here, I ended up writing the GUI in Processing: <a href="http://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter">http://www.contraptor.org/forum/t-388209/gremote-mini-host-for-arduino-gcode-interpreter</a></p> <p>After seeing a few serial errors on WinXP I'm now wondering if I need to add the checksum function with corresponding firmware changes. Somehow serial errors almost never happened to me with pySerial on Ubuntu. Not sure if it's the USB Serial drivers, or Java RXTXcomm..</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1256192</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1256192</link>
				<description></description>
				<pubDate>Mon, 12 Sep 2011 00:22:10 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>You're 100% correct. I ended up writing my own GUI in python and I just copied the checksum generator code from the interpreter. With 20-20 hindsight I have to wonder why it took me so long to do that. As you point out the interpreter is expecting a line of G code, *, and then the checksum. The checksum is generated using the xor command. The interpreter program can send back several different strings or characters. I sends an 'ok' if all was successful. It will send back a '~' to keep the port alive while it runs the stepper motors and at the same time flash the led next to the L on the arduino at the same time. Well, that is probably more than most of you want to know. :)</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1242608</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1242608</link>
				<description></description>
				<pubDate>Sun, 28 Aug 2011 20:31:17 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Looking at the code, it looks like you're supposed to send host-side checksum along with the instruction, presumably following '*' character (to be sure, need to see search_string() function):</p> <div class="code"> <div class="hl-main"> <pre><span class="hl-comment">// now see if digits match checksum</span><span class="hl-code"> </span><span class="hl-comment">//=================================</span><span class="hl-code"> </span><span class="hl-identifier">rsum</span><span class="hl-code"> = </span><span class="hl-identifier">search_string</span><span class="hl-brackets">(</span><span class="hl-code">'*', </span><span class="hl-identifier">instruction</span><span class="hl-code">, </span><span class="hl-identifier">size</span><span class="hl-brackets">)</span><span class="hl-code">; </span><span class="hl-reserved">if</span><span class="hl-code"> </span><span class="hl-brackets">(</span><span class="hl-identifier">rsum</span><span class="hl-code"> == </span><span class="hl-identifier">csum</span><span class="hl-brackets">)</span><span class="hl-code"> </span><span class="hl-reserved">return</span><span class="hl-code"> </span><span class="hl-reserved">true</span><span class="hl-code">; </span><span class="hl-reserved">else</span><span class="hl-code"> </span><span class="hl-brackets">{</span><span class="hl-code"> </span><span class="hl-comment">//...</span><span class="hl-code"> </span><span class="hl-reserved">return</span><span class="hl-code"> </span><span class="hl-reserved">false</span><span class="hl-code">; </span><span class="hl-brackets">}</span></pre></div> </div> <p>I guess the host software that goes along with this firmware computes the checksum and adds it to the line of GCode being sent.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1242597</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1242597</link>
				<description></description>
				<pubDate>Sun, 28 Aug 2011 20:19:44 +0000</pubDate>
				<wikidot:authorName>Albanetc</wikidot:authorName>				<wikidot:authorUserId>381022</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I would ask on Reprap forums or maybe try to trace it on github from one of the Reprap firmware forks.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1240148</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1240148</link>
				<description></description>
				<pubDate>Thu, 25 Aug 2011 16:52:41 +0000</pubDate>
				<wikidot:authorName>sullivan21</wikidot:authorName>				<wikidot:authorUserId>557651</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Where can I find the Arduino Gcode interpreter v1.3a or v.1.4 mmcp?</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1221157</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1221157</link>
				<description></description>
				<pubDate>Fri, 05 Aug 2011 01:02:30 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>:) Well, I think I tried most of the combinations, but I could have missed a few. I'd admit I've stuck with the 9600 baudrate. I've been looking at the checksum trying to understand how it really works. I'm also thinking the G sender code doesn't do a resend if it gets the bad checksum error. I know cutecom will ignore it. :) I started this whole project as a learning exercise. Sure didn't have checksum on my list of things to learn. :)</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1220529</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1220529</link>
				<description></description>
				<pubDate>Thu, 04 Aug 2011 09:11:50 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Maybe try other combination of data bits stop bits and parity in cutecom &#8230; also other baudrates &#8230; other than that I&nbsp;don't find anything right now &#8230;</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1220244</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1220244</link>
				<description></description>
				<pubDate>Thu, 04 Aug 2011 02:02:48 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Assuming you mean which G Code Interpreter, I'm not sure how to tell you without pasting the whole thing in here. There seem to be any number of them. Here are the comments plus a little bit</p> <p>// Arduino G-code Interpreter<br /> // v1.0 by Mike Ellery - initial software (<span class="wiki-email">moc.liamg|yrellem#moc.liamg|yrellem</span>)<br /> // v1.1 by Zach Hoeken - cleaned up and did lots of tweaks (<span class="wiki-email">moc.liamg|nekeoh#moc.liamg|nekeoh</span>)<br /> // v1.2 by Chris Meighan - cleanup / G2&amp;G3 support (<span class="wiki-email">moc.liamg|nahgiemc#moc.liamg|nahgiemc</span>)<br /> // v1.3 by Zach Hoeken - added thermocouple support and multi-sample temp readings. (<span class="wiki-email">moc.liamg|nekeoh#moc.liamg|nekeoh</span>)</p> <p>// v1.3a mmcp - removed extruder functionality<br /> // - changed variable array called word (!) to array called aWord<br /> // - added sum to serial comms</p> <p>// v1.4 mmcp - extended M114 to report limit switches as well as co-ordinates<br /> //============================================================================</p> <p>#define FIRMWARE_VERSION &quot;v1.4&quot;</p> <p>#include &lt;HardwareSerial.h&gt;</p> <p>Here is the checksum function</p> <p>boolean Checksum(char instruction[], int size) {<br /> // compute checksum<br /> // return TRUE if ok<br /> // return FALSE if not<br /> //====================</p> <p>int i;<br /> int csum;<br /> int rsum;</p> <p>// start with 0<br /> //=============<br /> csum = 0;</p> <p>// xor each byte<br /> //==============<br /> for (i=0; i&lt;size; i++) {<br /> if (instruction[i] == '*')<br /> break;<br /> csum = csum^instruction[i];<br /> }</p> <p>// now see if digits match checksum<br /> //=================================<br /> rsum = search_string('*', instruction, size);<br /> if (rsum == csum)<br /> return true;<br /> else {<br /> if (DebugLevel &gt; 1) {<br /> Serial.print(&quot;line: &gt;&quot;);<br /> Serial.print(instruction);<br /> Serial.print(&quot;&lt; length: &quot;);<br /> Serial.print(size, DEC);<br /> Serial.print(&quot; received: &quot;);<br /> Serial.print(rsum, DEC);<br /> Serial.print(&quot; calculated: &quot;);<br /> Serial.println(csum, DEC);<br /> }<br /> return false;<br /> }</p> <p>If that is not what you were looking for I'd be happy to provide more.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1219533</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1219533</link>
				<description></description>
				<pubDate>Wed, 03 Aug 2011 08:09:41 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>What firmware are you using ?</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1219132</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1219132</link>
				<description></description>
				<pubDate>Wed, 03 Aug 2011 02:35:59 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I poked in the code some more and managed to turn on the debugger. I'm sending 17 characters (the checksum's count, not mine) and it calculated 34. Makes me want to put in a divide by 2, but I'm sort of assuming that is not the correct answer.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1218152</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1218152</link>
				<description></description>
				<pubDate>Tue, 02 Aug 2011 03:46:17 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Thank you for the reply. As per your suggestion I loaded cutecom, I already had another serial port terminal, but I was willing to give cutecom a try. After playing around I was getting a &quot;start&quot; response back from the arduino and then &quot;rs 1&quot;. After digging through the G code interpreter, rs is a check sum error on the one and only line I'm trying to send. I saw a suggest online to reduce the baud rate. I set the baud rate down to 9600 in both cutecom and the G Code Interpreter. I got the same responses. I tried to send both a file with one line of G Code and I tired typing in a single line of G code. G1 X1.0 Y0.0 Z0.0 I continue to get the checksum error and of course no movement.</p> <p>Chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1216934</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1216934</link>
				<description></description>
				<pubDate>Sun, 31 Jul 2011 18:57:47 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Maybe try using a tool like cutecom ( sudo aptitude install cutecom ) and manually send Gcode to the machine to see if it works. It's better to check that that works before sending whole files of Gcode.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1216924</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1216924</link>
				<description></description>
				<pubDate>Sun, 31 Jul 2011 18:37:07 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I got past this with</p> <p>sudo ln -s /dev/ttyACM0 /dev/ttyS32</p> <p>No ideas why I have 31 serial ports, but I did and I had to use 32.</p> <p>I'm still not moving, but that could because I might be using the wrong G code interpreter.</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-1214938</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-1214938</link>
				<description></description>
				<pubDate>Fri, 29 Jul 2011 03:24:19 +0000</pubDate>
				<wikidot:authorName>cllsj</wikidot:authorName>				<wikidot:authorUserId>1077334</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I have my arduino uno connected to the serial port, but the program doesn't find it. The program seems to scan only /dev/ttys1, but I'm fairly sure my arduino is on /dev/ttyACM0. How can I change this?</p> <p>chuck</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-936930</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-936930</link>
				<description></description>
				<pubDate>Mon, 29 Nov 2010 07:25:28 +0000</pubDate>
				<wikidot:authorName>MMarz</wikidot:authorName>				<wikidot:authorUserId>632172</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Thanks!</p> <p>I didn't write the portion of the interface that deals with the simulation and have not changed it at all. I think the issue you are having is because the simulation code expects &quot;full&quot; Gcode and doesn't handle shortened forms.</p> <p>This works:<br /> G1 X1 Y1 Z1 F60.0<br /> G1 X1 Y1 Z5.5</p> <p>While this does not:<br /> G1 X1 Y1 Z1 F60.0<br /> G1 Z5.5</p> <p>When it does work, it'll show up as colored lines being drawn in 2D showing the cutter progress.</p> <p>It's one of those things that bothers me too, but it seems like way too much work to first reverse engineer how they implemented it and then fix it. I may take a crack at it in the future though.</p> <p>If anyone knows of good Gcode manipulating scripts, I'd appreciate a link. I'm looking for something that can take the long form Gcode and shorten it or vice versa. Also, being able to shift all absolute points to a new origin would be handy. CamBam doesn't always put out the code in a form that I want.</p> <p>I want to add a jog feature, but it'll be a while as I'm pretty busy right now. This is the perfect platform to create that type of interface too. For the time being, you can use &quot;Enter Individual Command&quot; box to move the tool head, or do what I did and make a physical controller. Until I found this interface, I used my controller to pause and continue my CNC. I still use it to position my machine before running code. I used a nintendo 64 controller, wired the joystick potentiometers to the Arduino analog inputs, and then added a bit of code to the Arduino.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-936254</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-936254</link>
				<description></description>
				<pubDate>Sun, 28 Nov 2010 13:31:51 +0000</pubDate>
				<wikidot:authorName>gatonero</wikidot:authorName>				<wikidot:authorUserId>406275</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Hi MMarz,</p> <p>today I have had time to test Gcode Sender Program. Very, very nice. I like very much, that it's searching automatically the Arduino port, that it gives a lot of informations like running line of code and my most favored feature is that you can pause and resume executing a gcode file.</p> <p>I also have some questions:<br /> Is it right, that no gcode or model preview can been seen in the Gcode Viewer window?<br /> I expected to see a tool head, but there is none. Is this OK?</p> <a href="https://www.flickr.com/photos/mantao05/5214491296/"><img src="https://farm6.static.flickr.com/5008/5214491296_a702339dd4.jpg" alt="flickr:5214491296" class="image" /></a> <p>I also would like to suggest a feature:<br /> Some buttons to jog all the axis in both directions manually by a pretended speed.</p> <p>Great work, one step towards to more usability! :-D</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-935513</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-935513</link>
				<description></description>
				<pubDate>Sat, 27 Nov 2010 03:24:21 +0000</pubDate>
				<wikidot:authorName>MMarz</wikidot:authorName>				<wikidot:authorUserId>632172</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Yes, you are right. Thank you. I forgot that part.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-935432</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-935432</link>
				<description></description>
				<pubDate>Sat, 27 Nov 2010 01:11:32 +0000</pubDate>
				<wikidot:authorName>gatonero</wikidot:authorName>				<wikidot:authorUserId>406275</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>You also have to install controlP5 in &#8230;/processing/libraries/. Unzip and put the extracted controlP5 folder into the libraries folder of your processing sketches.</p> <p>You can download it <a href="http://www.sojamo.de/libraries/controlP5/index.html" target="_blank">here</a></p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-935313</guid>
				<title>Re: Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-935313</link>
				<description></description>
				<pubDate>Fri, 26 Nov 2010 21:11:39 +0000</pubDate>
				<wikidot:authorName>arthurwolf</wikidot:authorName>				<wikidot:authorUserId>471107</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>Nice tool.</p> <p>Added this and a Perl script I use to the <a href="http://www.contraptor.org/motion-control">motion-control</a> page.</p> 
				 	]]>
				</content:encoded>							</item>
					<item>
				<guid>http://www.contraptor.org/forum/t-287260#post-935250</guid>
				<title>Gcode Sender Program</title>
				<link>https://www.contraptor.org/forum/t-287260/gcode-sender-program#post-935250</link>
				<description></description>
				<pubDate>Fri, 26 Nov 2010 18:46:00 +0000</pubDate>
				<wikidot:authorName>MMarz</wikidot:authorName>				<wikidot:authorUserId>632172</wikidot:authorUserId>				<content:encoded>
					<![CDATA[
						 <p>I didn't actually make this GUI. It was part of the <a href="http://cpwebste.blogspot.com/2010/05/hydra-mmm-v14-finally-released.html">Hydra MMM project</a>. I changed it so that it works with any arduino based cnc project. It is a GUI that connects to your Arduino, and then sends a gcode file, line by line to it. It has a visual representation of the tool head to show you the progress. It also shows you what lines it has already sent and the replies back from the Arduino. The only requirements are that your Arduino executes &quot;println(&quot;start&quot;);&quot; in setup{} and then uses &quot;\n&quot; to distinguish between lines of Gcode, and then the Arduino must send an &quot;println(&quot;ok&quot;);&quot; after each command it executes. If the Arduino sends a &quot;huh&quot;, then that line will be skipped and the program will continue. If you use <a href="http://www.contraptor.org/arduino-gcode-interpreter">Chris Meighan's firmware</a>, you are good to go.</p> <p>The GUI is a Processing Sketch.<br /> You need to download the processing program <a href="http://processing.org/download/">here.</a><br /> Download the GUI sketch <a href="http://www.mediafire.com/?c3x163a90a9byex">here.</a></p> <p>Then run the processing.exe and open the GUI sketch, Gcode_Feeder_GUI.pde. Press the play button and the GUI pops up. The sketches have the same extension as Arduino sketches, so don't accidentally try to run the processing sketch with the Arduino IDE.</p> <p>To connect to the Arduino you can press &quot;connect&quot; and it will try every available port until it connects, or you can type in the com port and press enter. Example: &quot;COM19&quot; &lt;&#8212;The case matters.</p> <p>Let me know if you find any errors.</p> <p>This website has been a great help in my CNC build. Thanks for all of the information.</p> 
				 	]]>
				</content:encoded>							</item>
				</channel>
</rss>