Contraptor

Is there a particular reason why the leadnut mount is fabricated from 1"x1" angle aluminum? It's 3/4" x 11/16", and I can see it's probably cleaner to cut the 11/16" from 1" than 3/4", but why cut at all? As far as I can see it could be 3/4" x 3/4", I don't see anything in the way at the ends of the lead screw, that would require the 11/16" dimension.

Of course, I am 3 dimensionally challenged, so I may just not see the big picture…

Thanks,
Miki.